Yamaha CS1D Owner's Manual - Page 149
From the MIX 1-24 INS, MIX 25-48 INS, MATRIX, OUTPUT [INSERT] switch.
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
CS1D Operating Manual (Basic Operation) 7. In the LCD FUNCTION ACCESS block, press the OUTPUT [INSERT] switch. The OUT INSERT function screen will appear. This contains mainly preamp settings for the input card that is patched to the insert point. • OUT INSERT function screen For a digital I/O card (MY card) installed in the DIO8 3 6 8. From the MIX 1-24 INS, MIX 25-48 INS, MATRIX 1-24 INS, and ST MAS INS tabs, click the tab that contains the channel into which you wish to insert the external device. The following items will be displayed, according to the type of input card that was patched to the insert point in step 3. For a mic line input card (LMY2-ML) installed in the AI8 12 4 3 5 6 7 8 For an AD card (LMY4-AD) installed in the AI8 3 6 8 1 GAIN GANG If this button is on, the head amp gain settings of adjacent input channels in the screen will be linked while preserving the current difference between them. 2 A/B LINK If this button is on, the input jack A/B selection of adjacent input channels in the screen will be linked. 3 Level meter This peak level meter shows the input level. 4 A/B This button switches between input jacks A/B of an AD card with head amp. 5 +48V For each channel, this button is an on/off switch for the phantom power of an AD card with head amp. The +48V switch located on the front panel of the AI8 input unit is the master phantom switch for the entire unit. If this switch is off, phantom power cannot be used with that unit (regardless of the setting of the +48V button in the display). 6 ø (phase) This button switches the input signal between normal/reversed phase. 7 GAIN This knob adjusts the input sensitivity of the preamp. The adjustable range is +10 dB - -68 dB, and the current value is shown in the numerical box located below. 8 This shows the input channel number and the pairing status. You can also enable/defeat pairing by clicking the heart symbol. 9. As necessary, adjust input card parameters such as the A/B button, +48V button, GAIN, and phase. 8 90