Yamaha CS1D Owner's Manual - Page 135
When a STEREO A/B is selected, In the SELECTED OUTPUT CHANNEL block
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
CS1D Operating Manual (Basic Operation) STEREO OUTPUT block ON ON TO MTRX MONO [SEL] switch SEL SEL INS 10 5 0 5 INS 10 5 0 5 When you select a channel, the LEDs and indicators of the SELECTED OUTPUT CHANNEL will show the settings of the various parameters for that channel. The type, number, and short name are shown by the switches and [NAME]/[NUMBER] indicator of the CHANNEL SELECT section. • When a MATRIX channel is selected The [MATRIX] switch LED will light, and the [NUMBER] indicator will show a number in the range of 1-24. • When a MIX channel is selected The [MIX] switch LED will light, and the [NUMBER] indicator will show a number in the range of 1-48. Hint It is also possible to select a channel by using the SELECTED OUTPUT CHANNEL block CHANNEL SELECT [▼/DEC]/[▲/INC] switches. For details refer to "CS1D Reference Manual (Hardware)" (→p.66). By repeatedly pressing a [SEL] switch of the STEREO OUTPUT block, you can alternate between the L channel and the R channel. 2. In the SELECTED OUTPUT CHANNEL block OUTPUT section, turn on the [ON] switch. SELECTED OUTPUT CHANNEL block [ON] switch [LEVEL] encoder ON SELECTED OUTPUT CHANNEL block [MATRIX] switch [ST] switch [NAME]/[NUMBER] indicator ST CHANNEL COPY MATRIX MIX SHIFT DEC INC CHANNEL SELECT [MIX] switch • When a STEREO A/B is selected The [ST] switch LED will light, and the [NUMBER] indicator will show either AL (L channel of STEREO A), Ar (R channel of STEREO B), bL (L channel of STEREO B), or br (R channel of STEREO B). [PAN/BAL] encoder [BAL] switch 3. In the OUTPUT section, raise the [LEVEL] encoder. The signal of the corresponding output channel will be sent from the output unit patched to that channel. 4. If in step 1 you selected a STEREO A/B channel or one channel of a pair of MIX/MATRIX channels, use the OUTPUT section [PAN/BAL] encoder to adjust the volume balance between the two channels. If either channel of the STEREO A/B channel or of a paired MIX/MATRIX channel is selected, the OUTPUT section [BAL] switch LED will light. This indicates that you can use the [PAN/BAL] encoder to adjust the balance between the two channels. 76