Yamaha CS1D Owner's Manual - Page 183

Chapter 12. Internal effects This chapter explains how to use the internal effects. About the internal effects of the PM1D system The PM1D system contains eight effect units. For each effect unit, you can select one of 29 effect types. The inputs and outputs of these internal effects are not fixed to any particular bus or channel. They can be freely patched to any output channel or input channel, or used as insert-in/insert-out in any channel. • Signal flow for the internal effects MIX channels 1-48 output MATRIX channels 1-24 output EFFECT 1 Input channels 1-96 {1-48} input ST IN channels 1-8 {1-4} input STEREO A/B channels output Input channels 1-96 {1-48} insert in INPUT PATCH OUTPUT PATCH Input channels 1-96 {1-48} insert out ST IN channels 1-8 {1-4} insert out EFFECT 2 ST IN channels 1-8 {1-4} insert in MIX channels 1-48 insert in MIX channels 1-48 insert out MATRIX channels 1-24 insert out EFFECT 8 MATRIX channels 1-24 insert in STEREO A/B channels insert in STEREO A/B channels insert out If the signal path is assigned to only one side of the effect, it will be processed as monaural input/stereo output. • When the signal path is assigned to only one input channel IINNPPUUTTLLor R R EFFECT L RETURN R RETURN • When the signal path is assigned to both input channels STEREO type effects INPUT L EFFECT L L RETURN If the signal path is assigned to both input channels, the processing will depend on the type of effect that is currently selected. "STEREO type" effects process the L/R input signals independently. "MIX type" effects mix the L/R inputs before inputting them to the effect, and then output in stereo. INPUT R EFFECT R MIX type effects INPUT L INPUT R EFFECT R RETURN L RETURN R RETURN 124