Cisco N7K-C7010 Configuration Guide - Page 173
Adding a Layer 2 Port to a Port Channel
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Chapter 6 Configuring Port Channels Configuring Port Channels Send document comments to [email protected] DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Step 3 Step 4 Example: switch# configure terminal switch(config)# interface port-channel channel-number Example: switch(config)# interface port-channel 1 switch(config-if) Specifies the port-channel interface to configure, and enters the interface configuration mode. The range is from 1 to 4096. The Cisco DC-OS software automatically creates the channel group if it does not already exist. show port-channel summary Example: switch(config-router)# show port-channel summary (Optional) Displays information about the port channel. copy running-config startup-config Example: switch(config)# copy running-config startup-config (Optional) Copies the running configuration to the startup configuration. Use the no interface port-channel command to remove the port channel and delete the associated channel group. Command no interface port-channel channel-number Example: switch(config)# no interface port-channel 1 Purpose Removes the port channel and deletes the associated channel group. This example shows how to create a port channel: switch# configure terminal switch (config)# interface port-channel 1 See the "Compatibility Requirements" section on page 6-5 for details on how the interface configuration changes when you delete the port channel. Adding a Layer 2 Port to a Port Channel You can add a Layer 2 port to a new channel group or to a channel group that already contains Layer 2 ports. The software creates the port channel associated with this channel group if the port channel does not already exist. BEFORE YOU BEGIN Enable LACP if you want LACP-based port channels. OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 6-17