Cisco N7K-C7010 Configuration Guide - Page 59
con terminal, interface ethernet, bandwidth, copy running-config startup-config, Step 1
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 2 Configuring Basic Interface Parameters Configuring the Basic Interface Parameters Send document comments to [email protected] SUMMARY STEPS 1. configure terminal 2. interface ethernet slot/port 3. bandwidth kbps 4. show interface ethernet slot/port 5. exit 6. copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Example: switch# configure terminal switch(config)# interface ethernet slot/port Step 3 Example: switch(config)# interface ethernet 3/1 switch(config-if)# bandwidth kbps Step 4 Example: switch(config-if)# bandwidth 1000000 switch(config-if)# show interface ethernet slot/port Step 5 Example: switch(config)# show interface ethernet 2/1 exit Specifies an Ethernet interface to configure, and enters interface configuration mode. Specifies the bandwidth as an informational-only value between 1 and 10,000,000. Displays the interface status, which includes the bandwidth value. Exits the interface mode. Step 6 Example: switch(config-if)# exit switch(config)# copy running-config startup-config (Optional) Copies the running Example: configuration to the startup configuration. switch(config)# copy running-config startup-config This example shows how to configure an informational value of 1,000,000 Kb for the Ethernet slot 3, port 1 interface bandwidth parameter: switch# configure terminal switch(config)# interface ethernet 3/1 switch(config-if)# bandwidth 1000000 switch(config-if)# OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 2-35