Cisco N7K-C7010 Configuration Guide - Page 76
SUMMARY STEPS, con terminal, rate-limit cpu direction, input, output, action
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Configuring the Basic Interface Parameters Chapter 2 Configuring Basic Interface Parameters Send document comments to [email protected] Interface Speed Pair Cable Length Distance to fault Channel Pair Status Eth3/1 auto --- N/A 1 +/- 2 m Pair A Open --- N/A 1 +/- 2 m Pair B Open --- N/A 1 +/- 2 m Pair C Open --- N/A 1 +/- 2 m Pair D Open n7000# show interface ethernet 3/12 cable-diagnostics-tdr Interface Speed Pair Cable Length Distance to fault Channel Pair Status Eth3/12 1000 --- N/A N/A Pair A Terminated --- N/A N/A Pair B Terminated --- N/A N/A Pair C Terminated --- N/A N/A Pair D Terminated Configuring Rate Limits for Packets that Reach the Supervisor Note Beginning with Cisco NX-OS Release 5.1, you can configure rate limits globally on the device for packets that reach the supervisor module. For more information, see the Cisco Nexus 7000 Series NX-OS Security Configuration Guide, Release 5.x. You can configure rate limits for packets that reach the supervisor module on a particular interface. SUMMARY STEPS 1. configure terminal 2. [no] rate-limit cpu direction {input | output | both} pps packets action log 3. (Optional) exit 4. (Optional) show system internal pktmgr interface ethernet slot/port 5. (Optional) copy running-config startup-config 2-52 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x OL-23435-03