Cisco N7K-C7010 Configuration Guide - Page 50

Configuring the Basic Interface Parameters Chapter 2 Configuring Basic Interface Parameters Send document comments to [email protected] DETAILED STEPS Step 1 Command configure terminal Step 2 Example: switch# configure terminal switch(config)# interface ethernet slot/port Step 3 Example: switch(config)# interface ethernet 3/1 switch(config-if)# {mdix auto | no mdix} Step 4 Example: switch(config-if)# mdix auto switch(config-if)# show interface ethernet slot/port Step 5 Example: switch(config)# show interface ethernet 3/1 switch(config-if)# exit Step 6 Example: switch(config-if)# exit switch(config)# copy running-config startup-config Example: switch(config)# copy running-config startup-config Purpose Enters configuration mode. Specifies an interface to configure, and enters interface configuration mode. Specifies whether to enable or disable MDIX detection for the port. Displays the interface status, which includes the MDIX status. Exits the interface mode. (Optional) Copies the running configuration to the startup configuration. This example shows how to enable MDIX for Ethernet port 3/1: switch# configure terminal switch(config)# interface ethernet 3/1 switch(config-if)# mdix auto switch(config-if)# This example shows how to disable MDIX for Ethernet port 3/1: switch# configure terminal switch(config)# interface ethernet 3/1 switch(config-if)# no mdix switch(config-if)# Configuring the Debounce Timer You can enable the debounce timer for Ethernet ports by specifying a debounce time, in milliseconds (ms), or disable the timer by specifying a debounce time of 0. You can show the debounce times for all of the Ethernet ports by using the show interface debounce command. 2-26 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x OL-23435-03