Cisco N7K-C7010 Configuration Guide - Page 73
port-channel
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 2 Configuring Basic Interface Parameters Configuring the Basic Interface Parameters Send document comments to [email protected] SUMMARY STEPS 1. configure terminal 2. interface [ethernet slot/port | interface-vlan vlan-id | loopback number | port-channel number | tunnel number] 3. no inherit port-profile name 4. exit 5. show port-profile 6. copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Example: switch# configure terminal switch(config)# interface [ethernet slot/port | interface-vlan vlan-id | loopback number | port channel number | tunnel number] Selects the range of interfaces. Step 3 Example: switch(config)# interface ethernet 7/3-5, 10/2, 11/20-25 switch(config-if)# no inherit port-profile name Step 4 Example: switch(config-if)# no inherit port-profile adam switch(config-if)# exit Removes the specified port profile from the selected interfaces. Exits the port-profile configuration mode. Step 5 Step 6 Example: switch(config-ppm)# exit switch(config)# show port-profile Example: switch(config)# show port-profile (Optional) Displays the port-profile configuration. copy running-config startup-config (Optional) Copies the running Example: configuration to the startup configuration. switch(config)# copy running-config startup-config This example shows how to remove the port profile named adam from Ethernet interfaces 7/3 to 7/5, 10/2, and 11/20 to 11/25: switch# configure terminal switch(config)# interface ethernet 7/3-5, 10/2, 11/20-25 switch(config-if)# no inherit port-profile adam switch(config-if)# OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 2-49