Cisco N7K-C7010 Configuration Guide - Page 188
Configuring the LACP Port-Channel MaxBundle
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Configuring Port Channels Chapter 6 Configuring Port Channels Send document comments to [email protected] DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Step 3 Step 4 Example: switch# configure terminal switch(config)# interface port-channel number Example: switch(config)# interface port-channel 3 switch(config-if) Specifies the interface to configure, and enters the interface configuration mode. lacp min-links number Example: switch(config-if)# lacp min-links 3 Specifies the port-channel interface to configure min-links, and enters the interface configuration mode. The default value for port-channel min-links is 1. The allowed range is 1 to 16. show running-config interface port-channel number (Optional) Displays the port-channel min-links configuration. Example: switch(config-if)# show running-config interface port-channel 3 Use the no lacp min-links command to restore the default port-channel min-links configuration. Command no lacp min-links Example: switch(config)# no lacp min-links Purpose Restores the default port-channel min-links configuration. This example shows how to configure port-channel interface min-links on module 3: switch# configure terminal switch (config)# lacp min-links 3 Configuring the LACP Port-Channel MaxBundle With Cisco NX-OS Release 5.1, you can configure the LACP minlinks feature. Although minlinks and maxbundles work only in LACP, you can enter the CLI commands for these features for non-LACP port channels, but these commands are nonoperational. BEFORE YOU BEGIN Ensure that you are in the correct port-channel interface. SUMMARY STEPS 1. configure terminal 2. interface port-channel number 6-32 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x OL-23435-03