Cisco N7K-C7010 Configuration Guide - Page 184
switchto vdc, no port-channel load-balance
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Configuring Port Channels Chapter 6 Configuring Port Channels Send document comments to [email protected] Ensure that you are in the correct VDC (or use the switchto vdc command). SUMMARY STEPS 1. configure terminal 2. port-channel load-balance {dest-ip-port | dest-ip-port-vlan | destination-ip-vlan | destination-mac | destination-port | source-dest-ip-port | source-dest-ip-port-vlan | source-dest-ip-vlan | source-dest-mac | source-dest-port | source-ip-port | source-ip-port-vlan | source-ip-vlan | source-mac | source-port} [module-number] 3. show port-channel load-balance 4. copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Example: switch# configure terminal switch(config)# port-channel load-balance { dest-ip-port | dest-ip-port-vlan | destination-ip-vlan | destination-mac | destination-port | source-dest-ip-port | source-dest-ip-port-vlan | source-dest-ip-vlan | source-dest-mac | source-dest-port | source-ip-port | source-ip-port-vlan | source-ip-vlan | source-mac | source-port} [module-number] Specifies the load-balancing algorithm for the device or module. The range depends on the device. The default for Layer 3 is source-dest-ip for both IPv4 and IPv6, and the default for non-IP is source-dest-mac. Step 3 Step 4 Example: switch(config)# port-channel load-balance source-destination-mac switch(config)# show port-channel load-balance Example: switch(config-router)# show port-channel load-balance copy running-config startup-config Example: switch(config)# copy running-config startup-config (Optional) Displays the port-channel load-balancing algorithm. (Optional) Copies the running configuration to the startup configuration. Use the no port-channel load-balance to restore the default load-balancing algorithm of source-dest-mac for non-IP traffic and source-dest-ip for IP traffic. 6-28 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x OL-23435-03