Cisco N7K-C7010 Configuration Guide - Page 181
Configuring the Speed and Duplex Settings for a Port-Channel Interface
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Chapter 6 Configuring Port Channels Configuring Port Channels Send document comments to [email protected] switch(config-if)# description engineering Configuring the Speed and Duplex Settings for a Port-Channel Interface You can configure the speed and duplex settings for a port-channel interface. SUMMARY STEPS 1. configure terminal 2. interface port-channel channel-number 3. speed {10 | 100 | 1000 | auto} 4. duplex {auto | full | half} 5. exit 6. show interface port-channel channel-number 7. copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Step 3 Step 4 Step 5 Example: switch# configure terminal switch(config)# interface port-channel channel-number Example: switch(config)# interface port-channel 2 switch(config-if) Specifies the port-channel interface that you want to configure, and enters the interface mode. speed {10 | 100 | 1000 | auto} Example: switch(config-if)# speed auto switch(config-if)# Sets the speed for the port-channel interface. The default is auto for autonegotiation. duplex {auto | full | half} Example: switch(config-if)# speed auto switch(config-if)# Sets the duplex for the port-channel interface. The default is auto for autonegotiation. exit Example: switch(config-if)# exit switch(config)# Exits the interface mode and returns to the configuration mode. OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 6-25