Cisco N7K-C7010 Configuration Guide - Page 60

Configuring the Basic Interface Parameters Chapter 2 Configuring Basic Interface Parameters Send document comments to [email protected] Configuring the Throughput Delay You can configure the interface throughput delay for Ethernet interfaces. The actual delay time does not change, but you can set an informational value between 1 and 16777215, where the value represents the number of tens of microseconds. SUMMARY STEPS 1. configure terminal 2. interface ethernet slot/port 3. delay value 4. show interface ethernet slot/port 5. exit 6. copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Step 2 Example: switch# configure terminal switch(config)# interface ethernet slot/port Step 3 Example: switch(config)# interface ethernet 3/1 switch(config-if)# delay value Step 4 Example: switch(config-if)# delay 10000 switch(config-if)# show interface ethernet slot/port Step 5 Example: switch(config)# show interface ethernet 3/1 switch(config-if)# exit Step 6 Example: switch(config-if)# exit switch(config)# copy running-config startup-config Example: switch(config)# copy running-config startup-config Purpose Enters configuration mode. Specifies an interface to configure, and enters interface configuration mode. Specifies the delay time in tens of microseconds. You can set an informational value range between 1 and 16777215 tens of microseconds. Displays the interface status, which includes the throughput-delay time. Exits the interface mode. (Optional) Copies the running configuration to the startup configuration. 2-36 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x OL-23435-03