Cisco N7K-C7010 Configuration Guide - Page 270
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x, OL-23435-03,
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Configuring IP Tunnels Chapter 8 Configuring IP Tunnels Send document comments to [email protected] DETAILED STEPS Step 1 Command configure terminal Step 2 Example: switch# configure terminal switch(config)# interface tunnel number Step 3 Example: switch(config)# interface tunnel 1 switch(config-if)# tunnel source {ip-address | interface-name} Step 4 Example: switch(config-if)# tunnel source ethernet 1/2 tunnel destination {ip-address | host-name} Step 5 Example: switch(config-if)# tunnel destination 192.0.2.1 tunnel use-vrf vrf-name Step 6 Example: switch(config-if)# tunnel use-vrf blue show interfaces tunnel number Step 7 Example: switch(config-if)# show interfaces tunnel 1 copy running-config startup-config Example: switch(config-if)# copy running-config startup-config Purpose Enters configuration mode. Creates a new tunnel interface. Configures the source address for this IP tunnel. Configures the destination address for this IP tunnel. (Optional) Uses the configured VRF to look up the tunnel IP destination address. (Optional) Displays the tunnel interface statistics. (Optional) Saves this configuration change. Use the no interface tunnel command to remove the tunnel interface and all associated configuration. Command no interface tunnel number Example: switch(config)# no interface tunnel 1 Purpose Deletes the tunnel interface and the associated configuration. Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 8-6 OL-23435-03