Cisco N7K-C7010 Configuration Guide - Page 261
Additional References, Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
UPC - 882658174445
View all Cisco N7K-C7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Chapter 7 Configuring vPCs Additional References Send document comments to [email protected] switch(config-if)# switchport trunk allowed vlan 1-50 switch(config-if)# vpc peer-link switch(config-if)# exit switch(config)# Step 9 Configure the interface for the port channel to the downstream device of the vPC. switch(config)# interface ethernet 7/9 switch(config-if)# switchport mode trunk switch(config-if)# allowed vlan 1-50 switch(config-if)# native vlan 20 switch(config-if)# channel-group 50 mode active switch(config-if)# exit switch(config)# interface port-channel 50 switch(config-if)# vpc 50 switch(config-if)# exit switch(config)# Step 10 Save the configuration. switch(config)# copy running-config startup-config Note If you configure the port channel first, ensure that it is a Layer 2 port channel. Additional References For additional information related to implementing vPC, see the following sections: • Related Documents, page 7-60 • Standards, page 7-60 • MIBs, page 7-60 OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 7-59