Cisco N7K-C7010 Configuration Guide - Page 249

Chapter 7 Configuring vPCs Configuring vPCs Send document comments to [email protected] BEFORE YOU BEGIN Ensure that you have enabled the vPC feature. Ensure that you are in the correct virtual device context (VDC) (or use the switchto vdc command). Ensure that you have configured the track object and the track list. Ensue that you assign all interfaces that connect to the core and to the vPC peer link to the track-list object on both vPC peer devices. SUMMARY STEPS 1. configure terminal 2. vpc domain domain-id 3. track track-object-id 4. exit 5. (Optional) show vpc 6. (Optional) copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Purpose Enters global configuration mode. Step 2 Step 3 Step 4 Example: switch# configure terminal switch(config)# vpc domain domain-id Example: switch(config)# vpc domain 5 switch(config-vpc-domain)# Enters the vPC domain number that you want to configure. The system enters the vpc-domain configuration mode. track track-object-id Example: switch(config-vpc-domain)# track object 23 switch(config-vpc-domain)# Adds the previously configured track-list object with its associated interfaces to the vPC domain. See the Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 5.x, for information on configuring object tracking and track lists. exit Exits the vpc-domain configuration mode. Step 5 Step 6 Example: switch(config-vpc-domain)# exit switch(config)# show vpc brief Example: switch# show vpc brief (Optional) Displays information on the tracked objects. copy running-config startup-config (Optional) Copies the running configuration to the Example: startup configuration. switch# copy running-config startup-config OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 7-47