Cisco N7K-C7010 Configuration Guide - Page 179

Chapter 6 Configuring Port Channels Configuring Port Channels Send document comments to [email protected] SUMMARY STEPS 1. configure terminal 2. interface port-channel channel-number 3. shutdown | no shutdown 4. exit 5. show interface port-channel channel-number 6. copy running-config startup-config DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Step 3 Step 4 Step 5 Step 6 Example: switch# configure terminal switch(config)# interface port-channel channel-number Example: switch(config)# interface port-channel 2 switch(config-if) Specifies the port-channel interface that you want to configure, and enters the interface mode. shutdown Example: switch(config-if)# shutdown switch(config-if)# Shuts down the interface. No traffic passes and the interface displays as administratively down. The default is no shutdown. no shutdown Example: switch(config-if)# no shutdown switch(config-if)# Opens the interface. The interface displays as administratively up. If there are no operational problems, traffic passes. The default is no shutdown. exit Example: switch(config-if)# exit switch(config)# Exits the interface mode and returns to the configuration mode. show interface port-channel channel-number (Optional) Displays interface information for the specified port channel. Example: switch(config-router)# show interface port-channel 2 copy running-config startup-config Example: switch(config)# copy running-config startup-config (Optional) Copies the running configuration to the startup configuration. This example shows how to bring up the interface for port channel 2: switch# configure terminal switch (config)# interface port-channel 2 switch(config-if)# no shutdown OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 6-23