Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 133

AG-1006 5 AG-1006 Message Message Type Severity Probable Cause Recommended Action Access Gateway mode has been . LOG INFO Indicates that the Access Gateway mode has been enabled or disabled. Execute the ag --modeshow command to verify the current status of the Access Gateway mode. AG-1007 Message Message Type Severity Probable Cause Recommended Action FLOGI response not received for the N_Port connected to the fabric. LOG WARNING Indicates that the N_Port connected to the fabric switch is not online. The specified N_Port has been disabled. Check the connectivity between the Access Gateway N_Port and the fabric switch port. AG-1008 Message Message Type Severity Probable Cause Recommended Action Invalid Port Login (PLOGI) response from the fabric on the N_Port . LOG WARNING Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI) request sent by the Access Gateway. Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 115 53-1004119-01