Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 490

5 HLO-1001 HLO Messages HLO-1001 Message Message Type Severity Probable Cause Recommended Action Incompatible Inactivity timeout from port , correct value . LOG | FFDC ERROR Indicates that the hello (HLO) message was incompatible with the value specified in the fabric shortest path first (FSPF) protocol. The Brocade switch will not accept FSPF frames from the remote switch. In Fabric OS, the HLO dead timeout value is not configurable, so this error can only occur when the Brocade switch is connected to a switch from another manufacturer. The dead timeout value of the remote switch must be compatible with the value specified in the FSPF protocol. Refer to the documentation for the other manufacturer's switch to change this value. HLO-1002 Message Message Type Severity Probable Cause Recommended Action Incompatible Hello timeout from port , correct value . LOG | FFDC ERROR Indicates that the hello (HLO) message was incompatible with the value specified in the fabric shortest path first (FSPF) protocol. The Brocade switch will not accept FSPF frames from the remote switch. In Fabric OS, the HLO timeout value is not configurable, so this error can only occur when the Brocade switch is connected to a switch from another manufacturer. The HLO timeout value of the remote switch must be compatible with the value specified in the FSPF protocol. Refer to the documentation for the other manufacturer's switch to change this value. 472 Brocade Fabric OS Message Reference 53-1004119-01