Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 368

5 FCR-1048 Recommended Action No action is required. FCR-1048 Message Message Type Severity Probable Cause Recommended Action On EX port () setting port credits failed. LOG | FFDC ERROR Indicates that the indicated credit type was not set. Setting port credits failed. Send the First Failure Data Capture (FFDC) log to the support. FCR-1049 Message Message Type Severity Probable Cause Recommended Action EX_Port () received an ELP command that is not supported. LOG ERROR Indicates an incoming exchange link parameter (ELP) command that is not supported. Use the portEnable and portDisable to enable or disable the port. If the problem persists, contact your switch service provider. FCR-1053 Message Message Type Severity Probable Cause Recommended Action Port was disabled, . LOG WARNING Indicates that the specified port was disabled because of a mismatched configuration parameter. Use the specified disable reason to identify a possible configuration parameter mismatch between the EX_Port and the switch at the other end of the link. 350 Brocade Fabric OS Message Reference 53-1004119-01