Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 185

BL-1037 5 BL-1037 Message Message Type Severity Probable Cause Recommended Action Faulting chip in slot = , miniS = ,port = due to BE/BI port fault. LOG CRITICAL Indicates that all ports on the chip have been disabled due to a fault on the chip. Make sure that the blade is seated correctly. If the blade is seated correctly, execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. Additional blade fault messages precede and follow this error, providing more information. Refer to other error messages for recommended action. If the message persists, replace the blade. BL-1038 Message Message Type Severity Probable Cause Recommended Action Inconsistent FPGA image version detected, please reboot the switch for recovery. LOG CRITICAL Indicates that the field-programmable gate array (FPGA) image version is incompatible with the software version. Reboot the switch. If the message persists, replace the switch. BL-1039 Message Message Type Severity Probable Cause Recommended Action Inconsistent FPGA image version detected, faulting the blade in slot . LOG CRITICAL Indicates that the field-programmable gate array (FPGA) image version is incompatible with the software version. Power cycle the blade using the slotPowerOff and slotPowerOn commands. If the message persists, replace the blade. Brocade Fabric OS Message Reference 167 53-1004119-01