Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 303

ESM-1003 5 ESM-1003 Message Message Type Severity Probable Cause Recommended Action ESMd uninitialization called for service :. LOG INFO Indicates that ESMd service uninitialization phase has completed. No action is required. ESM-1004 Message Message Type Severity Probable Cause Recommended Action ESMd failed to initialize rc:. LOG ERROR Indicates that the specified module has failed to initialize. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. ESM-1005 Message Message Type Severity Probable Cause Recommended Action Configuration () replay failed - . LOG ERROR Indicates the specified configuration failed to be reapplied during config replay. Use the portCfg, portShow, and portCfgShow commands to correct the cause of the failure. ESM-1010 Message Message Type Severity Probable Cause DP is OFFLINE. LOG INFO Indicates that the specified Data Processor (DP) has went offline. Brocade Fabric OS Message Reference 285 53-1004119-01