Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 181

BL-1025 5 BL-1025 Message Message Type Severity Probable Cause Recommended Action All GigE/FCIP/Virtualization/FC Fastwrite ports on the blade in slot will be reset as part of the firmware upgrade. LOG INFO Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the Gigabit Ethernet, Fibre Channel over IP (FCIP), virtualization data elements, and FC Fastwrite ports were reset. No action is required. BL-1026 Message Message Type Severity Probable Cause Recommended Action Internal port offline during warm recovery, state (0x). LOG CRITICAL Indicates that an internal port went offline during warm recovery of the switch. The switch will reboot and start cold recovery. Execute the supportSave command and then reboot switch. If the problem persists, replace the switch. BL-1027 Message Message Type Severity Probable Cause Recommended Action Blade in slot faulted, boot failed; status 0x 0x 0x. LOG CRITICAL Indicates that the blade failed to boot properly. Reboot or power cycle the blade using the slotPowerOff and slotPowerOn commands. If the message persists, replace the blade. Brocade Fabric OS Message Reference 163 53-1004119-01