Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 202

5 C2-1006 C2-1006 Message Message Type Severity Probable Cause Recommended Action S,C: Internal link errors reported, no hardware faults identified, continuing monitoring: fault1:0x, fault2:0x thresh1:0x. LOG WARNING Indicates that some internal link errors have been detected. These errors can be normal in an active running system. The system automatically starts a more detailed monitoring of the errors reported in the internal hardware. There is no action required by the user at this time. If any actual hardware failures are detected, the C2-1010 message will be generated identifying the failing field-replaceable unit (FRU). No action is required. C2-1007 Message Message Type Severity Probable Cause Recommended Action S,P(): best effort QoS will be turned off at next port state change as it is not supported under this configuration LOG WARNING Indicates that quality of service (QoS) will be turned off automatically at the next port state change because best effort QoS is no longer supported on 4 Gbps or 8 Gbps platform long distance ports. No action is required. C2-1008 Message Message Type Severity Probable Cause Recommended Action S,P(): QoS overwrites portcfglongdistance vc_translation_link_init. ARB will be used on the link. LOG WARNING Indicates that quality of service (QoS) has overwritten the fill word IDLE used on the long distance links. Arbitrated loop (ARB) will be used on the link. No action is required. 184 Brocade Fabric OS Message Reference 53-1004119-01