Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 190

5 BL-1055 BL-1055 Message Message Type Severity Probable Cause Recommended Action The octet mode of user port () in slot:, blade ID is not supported. LOG ERROR Indicates that quad small form-factor pluggables (QSFPs) supports only the octet combo 1. If the port is configured in the other 2 modes (2 and 3), there is a mismatch in capabilities. Set the correct octet combo by using the portCfgOctetSpeedCombo command. BL-1056 Message Message Type Severity Probable Cause Recommended Action Tunable SFP user port () in slot:, blade ID detected with not a valid channel configured. Configure valid channel range 1-102. LOG ERROR Indicates that the user port is not configred with a valid tunable small form-factor pluggable (TSFP) channel ID. The valid range is 1 through 102. Set the correct channel by using the portcfgge command. BL-1057 Message Message Type Severity Probable Cause Recommended Action FIPS failure detected, blade will be faulted. LOG CRITICAL Indicates that Federal Information Protection Standard (FIPS) failure is detected in one or more chips on the switch. Reboot or power cycle the switch. 172 Brocade Fabric OS Message Reference 53-1004119-01