Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 448

5 FSS-1001 FSS Messages FSS-1001 Message Message Type Severity Probable Cause Recommended Action Component () dropping HA data update (). LOG WARNING Indicates that an application has dropped a high availability (HA) data update. For a dual control processor (CP) system, enable the HA state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1002 Message Message Type Severity Probable Cause Recommended Action Component () sending too many concurrent HA data update transactions (). LOG WARNING Indicates that an application has sent too many concurrent high availability (HA) data updates. For a dual CP system, enable the HA state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1003 Message Message Type Severity Probable Cause Recommended Action Component () misused the update transaction () without marking the transaction begining. LOG WARNING Indicates that the Fabric OS state synchronization (FSS) service has dropped the update because an application did not set the transaction flag correctly. For a dual CP system, enable the high availability (HA) state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 430 Brocade Fabric OS Message Reference 53-1004119-01