Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 654

5 SEC-1099 SEC-1099 Message Message Type Severity Probable Cause Recommended Action Please enable your switch before running secModeEnable. LOG ERROR Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1100 Message Message Type Severity Probable Cause Recommended Action FCS switch present. Command terminated. LOG ERROR Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1101 Message Message Type Severity Probable Cause Recommended Action Failed to enable security on all switches. Please retry later. LOG ERROR Indicates the security enable failed on the fabric because one or more switches in the fabric are busy. Verify that the security event was planned. If the security event was planned, run the secFabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. 636 Brocade Fabric OS Message Reference 53-1004119-01