Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 673

SEC-1186 5 SEC-1186 Message Message Type Severity Probable Cause Recommended Action Configuration. LOG INFO Indicates the RADIUS, LDAP, or TACACS+ configuration was enabled or disabled as the primary authentication, authorization, and accounting (AAA) mechanism. No action is required. SEC-1187 Message Message Type Severity Probable Cause Recommended Action Security violation: Unauthorized switch tries to join fabric. LOG INFO Indicates a Switch Connection Control (SCC) security violation was reported. The specified unauthorized switch attempts to join the fabric. Check the SCC policy to verify the switches allowed in the fabric. If the switch should be allowed in the fabric but it is not included in the SCC policy, add the switch to the policy. If the switch is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. SEC-1188 Message Message Type Severity Probable Cause Recommended Action Security violation: Unauthorized device tries to FLOGI to index/area of switch . LOG INFO Indicates a Device Connection Control (DCC) security violation was reported. The specified device attempted to log in using fabric login (FLOGI) to an unauthorized port. The DCC policy correlates specific devices to specific port locations. If the device changes the connected port, the device will not be allowed to log in. Check the DCC policy and verify the specified device is allowed in the fabric and is included in the DCC policy. If the specified device is not included in the policy, add it to the policy. If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Brocade Fabric OS Message Reference 655 53-1004119-01