Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 839

ZONE-1054 5 ZONE-1054 Message Message Type Severity Probable Cause Recommended Action Default Zone All Access mode is set with Frame Redirection zones. LOG WARNING Indicates that the Default Zone All Access mode will not grant all access behavior when the frame redirection zones are defined. Remove frame redirection zones or set the Default Zone access mode to No Access using the defzone --noaccess command. ZONE-1057 Message Message Type Severity Probable Cause Recommended Action TI Zone has domain running pre FOS6.4.0 firmware. TI member (Domain , Index ) is not supported. LOG WARNING Indicates that an unsupported port index (> 511) is present in the TI zone path or the routing may not be set up correctly. Remove the port index from the TI zone using the zone --remove name command. ZONE-1058 Message Message Type Severity Probable Cause Recommended Action Domain present in TI zone became unreachable due to failover disabled mode. LOG WARNING Indicates that the domain present in the TI zone path is unreachable. This occurs if the TI zone paths are unavailable or the TI zone is set up incorrectly. Verify that the paths defined by TI zones are online or remove the domain from the TI zone using the zone --delete name command. Brocade Fabric OS Message Reference 821 53-1004119-01