Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 718

5 SNMP-1001 SNMP Messages SNMP-1001 Message Message Type Severity Probable Cause Recommended Action SNMP service is not available . LOG ERROR Indicates that the Simple Network Management Protocol (SNMP) service could not be started because of the specified reason. Therefore, you will not be able to query the switch through SNMP. Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the specified reason is an initialization failure, restart the switch using the reboot command. SNMP-1002 Message Message Type Severity Probable Cause Recommended Action SNMP initialization failed. LOG ERROR Indicates that the initialization of the SNMP service failed and therefore you will not be able to query the switch through SNMP. Restart or power cycle the switch. This will automatically initialize SNMP. SNMP-1003 Message Message Type Severity Probable Cause Recommended Action Distribution of Community Strings to Secure Fabric failed. LOG ERROR Indicates that the changes in the SNMP community strings could not be propagated to other switches in the secure fabric. Retry changing the SNMP community strings on the primary switch. 700 Brocade Fabric OS Message Reference 53-1004119-01