Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 137

AG-1018 5 AG-1018 Message Message Type Severity Probable Cause Recommended Action Host port should not be connected to port which is configured as N_Port. LOG ERROR Indicates that an initiator or target port is erroneously connected to a port configured for N_Port operation. Execute the switchShow command to display the status of all ports in the system. Execute the portCfgShow command to display the list of ports currently configured as N_Ports. Make sure the host is connected to an F_port. AG-1019 Message Message Type Severity Probable Cause Recommended Action Unable to failover N_Port . No other N_Port in port group: is online. LOG WARNING Indicates that failover across port groups is not supported. Check whether an alternate N_Port is configured in the specified port group using the ag --pgshow command. AG-1020 Message Message Type Severity Probable Cause Recommended Action F_Ports to N_Ports route/mapping has been changed. LOG INFO Indicates that F_Port-to-N_Port mapping has been changed because the switch has come online or some new N_Ports or F_Ports have come online. Execute the ag --mapshow command to display the updated F_Port-to-N_Port mapping. Brocade Fabric OS Message Reference 119 53-1004119-01