Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 556

5 MS-1005 MS-1005 Message Message Type Severity Probable Cause Recommended Action MS Invalid CT Response from d=. LOG ERROR Indicates that the Management Server (MS) received an invalid common transport (CT) response from the switch domain. MS expects either a CT accept IU or a reject IU; the MS received neither response, which violates the Fibre Channel - Generic Services (FS-GS) specification. Check the integrity of the FC switch at the specified domain. It is not sending correct MS information as defined by the Fibre Channel - Framing and Signaling (FC-FS) standard. MS-1006 Message Message Type Severity Probable Cause Recommended Action MS Unexpected iu_data_sz=. LOG ERROR Indicates that the Management Server (MS) received an information unit (IU) data of unexpected size. The IU payload and the IU size may be inconsistent with each other or with the command that is currently being processed. Wait a few minutes and try the operation again. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. MS-1008 Message Message Type Severity Probable Cause Recommended Action MS Failure while initializing . LOG ERROR Indicates that the Management Server (MS) failed while initializing the specified action. This message is often transitory. The action can be one of the following: • while writing to ms_els_q: MS is unable to write a message to the MS Extended Link Service Queue. • while inserting timer to timer list: MS is unable to add a timer to a resource. If the error persists, check the available memory on the switch using the memShow command. 538 Brocade Fabric OS Message Reference 53-1004119-01