Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 397

FICN-1030 5 FICN-1030 Message Message Type Severity Probable Cause Recommended Action HostDiskIng:FICON Purge received:Path=0x. LOG ERROR Indicates an active disk emulation device received a FICON Purge Path from the channel. If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1031 Message Message Type Severity Probable Cause Recommended Action HostDiskIng:FICON System Reset received on Path=0x**. LOG WARNING Indicates the FICON channel sent a System Reset to the disk control unit. No action is required. The MVS system was either set to initial program load (IPL) or performing error recovery. FICN-1032 Message Message Type Severity Probable Cause Recommended Action HostDiskIng:XRC Read Channel Extender Capabilities detected on Path: 0x. LOG INFO Indicates the eXtended Remote Copy (XRC) System Data mover was restarted to discover the capabilities of the channel extension equipment. No action is required. This is a part of the XRC initialization. Brocade Fabric OS Message Reference 379 53-1004119-01