Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 165

AUTH-1046 5 Recommended Action Check the certificate availability using the secCertUtil show -fcapall command. Install the certificate and reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1046 Message Message Type Class Severity Probable Cause Recommended Action has been successfully completed. AUDIT | LOG SECURITY INFO Indicates that the certificate database operation has been updated using the secAuthCertificate command. The values for Operation type can be "set" or "remove". No action is required. AUTH-1047 Message Message Type Class Severity Probable Cause Recommended Action has failed. AUDIT | LOG SECURITY ERROR Indicates that the specified action has failed to update the certificate database using the secAuthCertificate command. The values for Operation type can be "set" or "remove". Execute the secAuthCertificate command again. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 147 53-1004119-01