Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 373

FCR-1066 5 FCR-1066 Message Message Type Severity Probable Cause Recommended Action Fabric on port has the same fabric ID as in another fabric switch . LOG ERROR Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the same fabric ID as the fabric connected to the specified port. If the fabric split, merge the fabrics and manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport or portcfgVExport commands. FCR-1067 Message Message Type Severity Probable Cause Recommended Action Zone configurations, total LSAN zones and aliases, exceeded on port by entries; max entries: . LOG WARNING Indicates that the total number of zone configurations created in connected fabric exceeds the maximum number supported by the Fibre Channel. The limit includes both active and configured information that is part of be zoning database in the edge fabric. Non-LSAN zones are not counted in the limit. Limit the logical storage area network (LSAN) zoning-related zone configuration in the edge fabric connected to this port. FCR-1068 Message Message Type Severity Probable Cause Recommended Action The FC Routing service is disabled. LOG INFO Indicates that the FC Routing service is disabled. This is caused by issuing the fosConfig --disable fcr, configDefault, or the configDownload command with the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by the factory. No action is required. Brocade Fabric OS Message Reference 355 53-1004119-01