Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 555

MS-1003 5 MS-1003 Message Message Type Severity Probable Cause Recommended Action MS detected Unstable Fabric(). LOG INFO Indicates that the Management Server (MS) detected an unstable fabric; the command or operation may not be successfully completed. This message is often transitory. The message string value can be one of the following: • DOMAIN_INVALID for a req from: The domain is invalid for a request. • No WWN for: Unable to acquire the World Wide Name (WWN) for the corresponding domain. The domain number is the target domain that caused error. The fabric may be reconfiguring, forming, or merging. Wait a few minutes and try the operation again. Execute the fabricShow command or the secFabricShow command to verify that the number of domains matches the Management Server known domains. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. MS-1004 Message Message Type Severity Probable Cause Recommended Action MS detected ONLY 1 Domain(d=). LOG INFO Indicates that the Management Server (MS) detected an unstable count of domains in its own local resource. This message is often transitory. The fabric may be reconfiguring, forming, or merging. Wait a few minutes and try the operation again. Execute the fabricShow command or the secFabricShow command to verify that the number of domains matches the Management Server known domains. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 537 53-1004119-01