Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 329

FABR-1009 5 FABR-1009 Message Message Type Severity Probable Cause Recommended Action . LOG WARNING Indicates that errors were reported during the exchange fabric parameter state; cannot allocate domain list due to a faulty exchange fabric parameter (EFP) type. This message is rare and usually indicates a problem with the Fabric OS. The fabric daemon will discard the EFP. The system will recover through the EFP retrial process. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1010 Message Message Type Severity Probable Cause Recommended Action . LOG WARNING Indicates that errors occurred while cleaning up the request domain ID (RDI). The error description provides further details. This message is rare and usually indicates a problem with the Fabric OS. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1011 Message Message Type Severity Probable Cause Recommended Action . LOG | FFDC ERROR Indicates that the Fabric OS is unable to inform the Fabric OS State Synchronization Management module (FSSME) that the fabric is stable or unstable. This message is rare and usually indicates a problem with the Fabric OS. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 311 53-1004119-01