Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 152

5 AUTH-1004 AUTH-1004 Message Message Type Severity Probable Cause Recommended Action Failed to set type to . LOG ERROR Indicates that the authUtil command has failed to set the authentication configuration value. The data type can be authentication type, DH group type, hash type, or policy type. Execute the authUtil command again. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1005 Message Message Type Severity Probable Cause Recommended Action Authentication file does not exist: . LOG ERROR Indicates an authentication file corruption. Execute the firmwareDownload command to reinstall the firmware. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1006 Message Message Type Severity Probable Cause Recommended Action Failed to open authentication configuration file. LOG WARNING Indicates an internal problem with the Secure Fabric OS. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 134 Brocade Fabric OS Message Reference 53-1004119-01