Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 831

ZONE-1015 5 ZONE-1015 Message Message Type Severity Probable Cause Recommended Action Not owner of the current transaction . LOG WARNING Indicates that a zoning change operation is not allowed because the zoning transaction is opened by another task. Indicates concurrent modification of the zone database by multiple administrators. Wait until the previous transaction is completed. Verify that only one administrator is working with the zone database at a time. ZONE-1017 Message Message Type Severity Probable Cause Recommended Action FA Zone() contains incorrect number of Initiator and Target devices. LOG ERROR Indicates that the fabric assist (FA) zoning configuration has more than one initiator. This is because of incorrect entries in the FA zoning configuration. Edit the zone database to make sure that only one initiator is set for each FA zone configuration. ZONE-1019 Message Message Type Severity Probable Cause Recommended Action Transaction Commit failed. Reason code () \"\". LOG ERROR Indicates that reliable commit service (RCS) had a transmit error. RCS is a protocol used to transmit changes to the configuration database within a fabric. Often this message indicates a transitory problem. Wait a few minutes and retry the command. Make sure your changes to the zone database are not overwriting the work of another administrator. Execute the cfgTransShow command to determine if there is any outstanding transaction running on the local switches. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 813 53-1004119-01