Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 154

5 AUTH-1011 AUTH-1011 Message Message Type Severity Probable Cause Recommended Action Failed to register for failover operation: switch error . LOG WARNING Indicates an internal problem with the Secure Fabric OS. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1012 Message Message Type Severity Probable Cause Recommended Action Authentication is rejected: port explain reason . LOG WARNING Indicates that the specified authentication is rejected because the remote entity does not support authentication. Verify the hash type, protocol, group, and authentication policy using the authutil --show command. AUTH-1013 Message Message Type Severity Probable Cause Recommended Action Cannot perform authentication request message: port , message code . LOG WARNING Indicates that the system is running low on resources when receiving an authentication request. Usually this problem is transient. The authentication may fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 136 Brocade Fabric OS Message Reference 53-1004119-01