Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 229

C4-1037 5 C4-1037 Message Message Type Severity Probable Cause Recommended Action S,C: IOS Error, block 1st = 0x, intr_cause = 0x, ios_int_en_set = 0x single bit error . LOG ERROR Indicates that the hardware parity error is detected in the Condor 4 Inter-network Operating System (IOS) block. IOS counters may have been corrupted, ignore IOS flow counters in the last polling cycle. C4-1038 Message Message Type Severity Probable Cause Recommended Action Slow drain device quarantine (SDDQ) or Restore action is not completed for the sid 0x, did 0x. LOG INFO Indicates that the Frame Transformation Block (FTB) entry is not added. No action is required. C4-1039 Message Message Type Severity Probable Cause Recommended Action S,C: Temperature is , maximum threshold is . If it exceeds threshold, the unit will be shutdown. LOG ERROR Indicates that the operating environment conditions are causing the application-specific integrated circuit (ASIC) to overheat. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Brocade Fabric OS Message Reference 211 53-1004119-01