Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 341

FABR-1051 5 FABR-1051 Message Message Type Severity Probable Cause Recommended Action D-Port test failed for slot and port . LOG ERROR Indicates that the D_Port test failed for the given slot and port due to one of the following reasons: • The small form-factor pluggable (SFP) fault detected by electrical loopback test failure. • The cable fault detected by optical loopback test failure. • An application-specific integrated circuit (ASIC) issue detected by link traffic test failure. Replace the faulty SFPs, cables, or blade. FABR-1052 Message Message Type Severity Probable Cause Recommended Action The configured port speed is invalid. Persistently disabling port . LOG INFO Indicates that the configured speed for the specified port is invalid. Execute the portCfgSpeed command to change the port speed. FABR-1053 Message Message Type Severity Probable Cause Recommended Action The switch is disabled due to an inconsistency found in the interop config parameters. LOG CRITICAL Indicates that the configuration keys have interopmode parameters such as switch.interopMode and switch.mcdtFabricmode set. Execute the interopmode command to reset the parameters. Brocade Fabric OS Message Reference 323 53-1004119-01