Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 817

XTUN-1006 5 XTUN-1006 Message Message Type Severity Probable Cause Recommended Action FCIP FC frame drop due to transmit timeout on slot= DP= BLS= DR= Frames Dropped=. LOG ERROR Indicates that a Fibre Channel (FC) Send frame timeout occurred and the frames were dropped from the SW queue. This error indicates that there is a slow draining device or a hung Blaster TX Descriptor Ring. XTUN-1007 Message Message Type Severity Probable Cause Recommended Action FCIP FC frame drop due to truncated receive on slot= DP= BLS= DR= Frames Dropped=. LOG ERROR Indicates that a Fibre Channel (FC) Received frame event was posted, but the frame was dropped due to an invalid receive length. This error occurs only on faulty hardware. Contact your vendor's customer support for assistance. XTUN-1008 Message Message Type Severity Probable Cause Recommended Action FCIP Control block memory usage slot= DP= Allocated= Free= Total=. LOG WARNING Indicates that the control block memory pool has crossed the usage threshold. This message is generated when a significant amount of control block memory has been allocated from the free pool. This memory is limited and you should monitor for events that indicate that greater than 80 percent of the pool has been allocated. Contact your vendor's customer support for assistance. Brocade Fabric OS Message Reference 799 53-1004119-01