Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 569

NS-1007 5 Recommended Action The switch will process the new process ID (PID) and leave the existing PID intact. Subsequent switch operations will clean up the obsolete PID. However, it is recommended that administrators remove devices with a duplicate WWN. NS-1007 Message Message Type Severity Probable Cause Recommended Action NS has detected a logical ISL port in TI zone in fabric . Routing may not be setup correctly. LOG WARNING Indicates that a logical inter-switch link (LISL) is detected in a traffic isolation (TI) zone. Remove the LISL port from the TI zone because the routing may not be set up correctly. NS-1008 Message Message Type Severity Probable Cause Recommended Action Open FR license not installed. LOG WARNING Indicates that Open FR license is not installed and therefore local devices involved in Open FR will not function. Install the Open FR license or relocate Open FR devices to a licensed switch. NS-1009 Message Message Type Severity Probable Cause Recommended Action NS has detected a device with Node WWN as zero, pid 0x. LOG WARNING Indicates that a device has logged in with node World Wide Node Name (WWNN) as zero. Brocade Network Advisor (BNA) will not show the port connectivity. Check the device that logged in. The device could be faulty. Brocade Fabric OS Message Reference 551 53-1004119-01