Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 842

5 ZONE-1066 ZONE-1066 Message Message Type Severity Probable Cause Recommended Action Zoning operation failed to complete on the local switch - code . LOG ERROR Indicates an IPC error occurred between Name Server and Zone Server. The switch is in an inconsistent state and can be corrected only by a reboot or power cycle. Upon reboot, if switch is unable to join the fabric due to a zone conflict, issue cfgClear command. If there is an enabled-configuration, commit cfgClear operation by issuing cfgDisable. If there is no enabled-configuration, commit cfgClear operation by issuing cfgSave. ZONE-1067 Message Message Type Severity Probable Cause Recommended Action QoS high zone with Flow ID 5 has been assigned to an alternate VC due to vTap and QoS high priority zoning compatibility mode. LOG WARNING Indicates that Virtual Tap (vTAP) and quality of service (QoS) high priority zoning compatibility mode is enabled and therefore the existing QoSH5 will be remapped to a lower virtual channel (VC). No action is required.. ZONE-1068 Message Message Type Severity Probable Cause Recommended Action Admin Domains are not supported in Fabric OS 8.0.1 (Event:). LOG WARNING Indicates that Admin Domains (ADs) are not supported in Fabric OS 8.0.1. Admin Domain commands and functionality will be removed in future Fabric OS versions. To display the AD configuration use ad --exec 255 "ad --show" command or ad --sel 255 command followed by ad --show command. Please refer to the Fabric OS Administrator Guide in the Managing Administrative Domains Section for more information. 824 Brocade Fabric OS Message Reference 53-1004119-01