Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 830

5 ZONE-1007 Recommended Action No action is required. ZONE-1007 Message Message Type Severity Probable Cause Recommended Action Ioctl () in () at port () returns code () and reason string (). LOG INFO Indicates that frame filter logic reported a failure during the specified I/O Control (IOCTL) call. This is usually a programming error when adding CAM entries before the filter setup. Avoid this problem in the following ways: • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. ZONE-1010 Message Message Type Severity Probable Cause Recommended Action Duplicate entries in zone () specification. LOG WARNING Indicates that there are duplicate entries in the specified zone object. This message occurs only when enabling a zone configuration. Check the members of the zone using the cfgShow command. Delete the duplicate member using the zoneRemove command. ZONE-1013 Message Message Type Severity Probable Cause Recommended Action QuickLoop not supported. LOG WARNING Indicates that the QuickLoop feature is not supported in the current version of Fabric OS. QuickLoop zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Edit the zone database to remove the QuickLoop zoning definition in the effective configuration. 812 Brocade Fabric OS Message Reference 53-1004119-01