Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 54

1 System module descriptions TABLE 6 System module TRCK TS UCST UPTH VS WEBD XTUN ZONE System module descriptions (Continued) Description The track change feature tracks the following events: • Turning on or off the track change feature • CONFIG_CHANGE • LOGIN • LOGOUT • FAILED_LOGIN If any of these events occur, a message is sent to the system message log. Additionally, if the SNMP trap option is enabled, an SNMP trap is also sent. For information on configuring the track change feature, refer to the Fabric OS Command Reference or the Fabric OS Administrator's Guide. Time Service provides fabric time-synchronization by synchronizing all clocks in the fabric to the clock time on the principal switch. UCST is a part of the Fabric Shortest Path First (FSPF) protocol that manages the Unicast routing table. UPATH is a part of the FSPF protocol that uses the SPF algorithm to dynamically compute a Unicast tree. The VS module messages indicate any problems or information associated with the Dynamic Fabric Provisioning feature, including commands associated with the fapwwn command and configurations. Indicates problems with the Web Tools module. XTUN messages are generated by the FCIP Tunnel implementation. These messages indicate status of FCIP tunnels, FCIP emulation events for FCP traffic, or FCIP debug information (FTRACE buffer status changes). The zone module messages indicate any problems associated with the zoning features, including commands associated with aliases, zones, and configurations. 34 Brocade Fabric OS Message Reference 53-1004119-01