Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 352

5 FCPH-1001 FCPH Messages FCPH-1001 Message Message Type Severity Probable Cause Recommended Action : failed, out of memory condition. FFDC | LOG CRITICAL Indicates that the switch is low on memory and failed to allocate new memory for a Fibre Channel driver instance. The function value can only be fc_create. This function creates a Fibre Channel driver instance. The failed function call can only be kmalloc_wrapper, which has failed. This function call is for kernel memory allocation. A non-bladed switch will automatically reboot. For a bladed switch, the active CP blade will automatically fail over and the standby CP will become the active CP. FCPH-1002 Message Message Type Severity Probable Cause Recommended Action Port has been disabled since switch requires authentication when device authentication policy is set to ON. LOG WARNING Indicates a device that does not support authentication has tried to log in to the switch when the device authentication policy is in ON status on the switch. Enable the authentication on the device or set the device authentication status to PASSIVE/OFF on the switch if it is not mandatory. Use the authUtil command to change the device authentication policy. FCPH-1003 Message Message Type Severity Probable Cause Recommended Action New port has same Port WWN as old port as part of duplicate Port WWN detection policy. LOG WARNING Indicates that the specified new port has the same Port World Wide Name (PWWN) as the old port. No action is required. 334 Brocade Fabric OS Message Reference 53-1004119-01