Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 346

5 FABS-1010 FABS-1010 Message Message Type Severity Probable Cause Recommended Action : Wrong media_event . LOG WARNING Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS problem or file corruption. Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. FABS-1011 Message Message Type Severity Probable Cause Recommended Action [0x]:Invalid input state 0x. LOG ERROR Indicates that an unrecognized state code was used in an internal Fabric OS message for a field-replaceable unit (FRU). Reboot or power cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. FABS-1013 Message Message Type Severity Probable Cause Recommended Action [0x]:Unknown blade type 0x. LOG ERROR Indicates an unrecognized type of blade has been discovered in the system. This may be caused by an incorrect field-replaceable unit (FRU) header, inability to read the FRU header, or the blade may not be supported by this platform or Fabric OS version. Verify that the blade is valid for use in this system and this version of Fabric OS. Reseat the blade. If this is a valid blade and reseating does not solve the problem, replace the blade. 328 Brocade Fabric OS Message Reference 53-1004119-01