Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 178

5 BL-1016 BL-1016 Message Message Type Severity Probable Cause Recommended Action Blade port in slot failed to enable. FFDC | LOG CRITICAL Indicates that the specified blade port could not be enabled. Make sure that the blade is seated correctly. If the blade is seated correctly, execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1017 Message Message Type Severity Probable Cause Recommended Action Slot Initializing... LOG INFO Indicates that the slot has started initializing the ports. No action is required. BL-1018 Message Message Type Severity Probable Cause Recommended Action Slot Initialization completed. LOG INFO Indicates that the slot has completed initializing the ports. No action is required. 160 Brocade Fabric OS Message Reference 53-1004119-01