Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 693

SEC-1339 5 SEC-1339 Message Message Type Severity Probable Cause Recommended Action Distribute command failed. There are Inflight encryption enabled switch(s) in fabric. Auth db(s) distribution is blocked LOG ERROR Indicates there was an attempt to distribute AUTH databases with switch policy (Off/Passive) from the fabric to a switch that has Inflight Encryption enabled Disable or enable Inflight encryption in all the switches in the fabric SEC-1340 Message Message Type Severity Probable Cause Recommended Action . LOG ERROR Indicates that the Device Connection Control (DCC) policy member is configured incorrectly. Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-1341 Message Message Type Class Severity Probable Cause Recommended Action Failed to update client capability to ESS (Exchange Switch Support) after maximum number of retries - return code . Failing sync dump to standby CP. AUDIT | LOG SECURITY INFO Indicates that Exchange Switch Support (ESS) is unable to update its capability. Failed to send the sync dump to standby control processor (CP). Verify that HA synchronization has failed using the haShow command. If HA synchronization has failed, execute the haSyncStart command on active CP to resynchronize the HA state. Brocade Fabric OS Message Reference 675 53-1004119-01